Finished Flame Princess costume!

Here's the Finished Flame Princess costume! Photos taken at Animazement 2012

 

Flame Princess and Adventure Time Makeup!

Animazment was the first time I wore this costume, so I greatly underestimated how long it would take to put on all that makeup.
It took around 1 hour and 45 minutes, but we were all helping each other. Well, Ktar was putting on makeup for Ice Queen, and my sister was putting on makeup for Marceline, and we did each other's backs.

I was the only one who had the makeup to test it out before the convention, so I was the only one who had it down on what to do to get it on evenly and to make it stay put.

I didn't' have any problems with it coming off for several hours, and only then it was minor. I didn't put any on my palms to start with so I didn't have any problems with it coming off there anyway.

We used Ben Nye creme liners for Flame Princess and Marceline, and Ktar chose to use light blue Ben Nye creme foundation.
We bought all of our suplies from Frends Beauty Supply online, but the shipping was really expensive for what we were getting, so we all bought it together and split the shipping.
Link to Creme color search
Link to Final Seal
Link to Colorless Powder

For Flame princess, I mixed 2 containers of Goldenrod, and 1/4 of a container of Red. For Marceline I mixed 1 White and 1 Grey container.

I used Haanyan's Homestuck makeup tutorial to get the idea on how to use this sort of makeup.

I contoured with red Creme Liner for Flame Princess, black eyeshadow for Marceline, and Ktar used blue lipstick and eyeshadow for her lips and contouring.

To seal it we powdered the heck out of ourselves, which we should have photographed, which was a party and a half in itself….

After powdering it, we sprayed ourselves with the Final Seal, and we were on our merry way.

Ktar and I were Rooks in this year's Cosplay Chess, on the side character's side, and we both made it until the end of the match, helping the side characters win, haha

We wore the Adventure Time costumes from about 9am until 6pm, and we still looked really good by the end of the day, makeup wise. We got up at 7 to start putting on the makeup and didn't really start until 7:30 and we didn't finish until around 9 or 9:15…So if any one is thinking of doing something like this, start far in advance!

Flame Princess wig progress/information

I've had a few people ask me about how I did my Flame Princess wig, and honestly, I made it up as I went.

I started with:
 a Cosplay Wigs USA Pumpkin 90cm long curly wig.  (it was a lot lighter than the photo)
Clear Elmer's School Glue
a curved sewing needle
thick strong thread
clear thread
foam brushes
lots of bobby pins (to hold it in place as you glue it)

The curls made it harder to work with, but if I made it again, I'd still use the curly one, just because I really loved the curls that came set into the wig. I used the same wig in green for my Jadesprite costume.

First off, the orange wasn't the color I wanted it, so I dyed it a bit darker orange.
I used this method (click for full resolution)

 

But instead of putting it in a tub to soak, I put my dye in a spray bottle and sprayed it in sections all over my wig. I actually WANTED it to not be 100% even in color. I thought the variances in shades of orange would make it look a little bit more realistic.
After it dried overnight, I loosely braided it before I washed out the extra dye, so it wouldn't get quite  as tangled. Its going to get VERY tangled through the whole dyeing and rinsing process.

Red and orange dyes never really wash out 100%, so I gave up after about half an hour of washing it in the tub, under COLD water.

After rinsing, I made a solution of lotion and water in a spray bottle and shook it up really well until it was a could water. This makes a good detangler, which will smell like whatever lotion you use.
I just sprayed it all over a tangle and started working it out gently, starting at the BOTTOM of the fibers.
It took longer to detangle it than it did to rinse it.
I let the wig sit overnight again to dry throughly, and I sectioned it out into a lot of equal sections before I started to style it.

I carved a block of green florist's foam into a rough cone-type shape, then covered it with a red-orange craft foam, which I forgot to take a photo of before I sewed it into my wig with thick button thread.

I sewed it to the vertical elastic in the wig, in the position I wanted it. I didn't remove any wefts underneath where I put the cone, since it wasn't super large.

After I made sure the cone was where I wanted it, I used the foam brushes to spread glue all over the cone and started to use small sections of hair from close to the cone to cover it. I spread out the hair evenly and made sure to really saturate it with glue, since this was the base coat of fiber and you wouldn't see it anyway.

I made up the wrapping pattern as I went, and I needed to add some more volume to the base of the cone, so I pulled out some small sections of hair and teased and back combed it until I had a nice fluffy tangled mess, which I rolled up and sewed into position with the clear thread.

it looks kind of nasty and really messy at this point, but you cover it all up int he end, and this was a lot easier to me than to try to make a pad out of foam or batting, since it was soft, and exactly the same color as the wig.

I didn't have much of a plan on how I was going to wrap it up, but I knew what I kind of wanted it to look like in the end.
I would take bobby pins and pin it in a way to see if I liked how it looked, and I would un-pin it, use the foam brush to burst a little bit of glue on the fiber in sections, starting nearer the roots, placing that where I wanted it, and pinned it where I wanted it before eI move on further down the section of fiber.

Almost finished:

I don't know what else to say about it, except that it took over 15 hours (nearly straight!) of styling, and about 2 and half days of just dyeing it and rinsing it out.

I just kept wrapping and pinning and unpinning and gluing and pinning it again.

Once I got to the outermost layer, I didn't coat the entire section of fiber with glue, I kind of put a line of glue where I knew it would be pinned and made sure the section I was glueing was really stuck down.

After I had the whole outer layer pinned and glued down, I let that dry for a while.
After it had all dried, I used the curved needle and the clear thread to sew into my wig to hold down all the little curls and to make sure the outermost layer didn't budge.

The wig is REALLY back -heavy, so I got a couple of toupee clips and sewed into the front, right about where the hairline is above my eyes.

And that's it.
I didn't use any hairspray on this, since I dyed it with alcohol, and hairspray is primarily alcohol, which would have ended up with the color being stripped out or running if I had used it as my primary adhesive.

Here's the finished product!

Animazement progress update

Animazement is in less than a week now.  I've made a lot of progress, and I'll make some new posts soon about my new costumes, since I haven't forgotten to take pictures this time, haha.

As far as new costumes go:

Flame Princess:
- dress = about 99%: I've got to adjust the shoulder a tiny bit and I'm done
- wig = 50% : I've only got a little more to do and I'll be finished :)
- makeup = 100% : I've done tests and I think it's going to work well :)
- shoes = 100%

Jadesprite
- dress = about 99% : some minor fitting on the arms
- wig = 100% : I didn't have to do anything but trim the bangs
- makeup = 100% : tests done and they looked good :)
- shoes = 100% : I need to paint them, and they'll be finished
- ears = 50%

I'll be wearing Jadesprite Friday afternoon/night and Saturday night.
Flame Princess will be most of the day Saturday. I'll be in cosplay chess with it :)

If I can find them, I'll wear Sophitia and Team Magma as well. Moving and losing things really sucks.

If anyone else is going, let me know! We can meet or something :)