Showing posts with label wig. Show all posts
Showing posts with label wig. Show all posts

Tuesday, June 12, 2012

Jadesprite progress/process


(I apologize for the lack of progress photos of this! I made most of this in the middle of the night and didn't feel like looking for my camera. I'll add in some detail shots of what I'm talking about later. As always, feel free to ask me any questions you might have!)

For Jadesprite, I just used a lot of materials that I had lying around. The only things I bought specifically for this costume were the wig, makeup, and glasses.

I made the dress out of a cotton/poly jersey that I had bought over a year ago when it was $1 a yard at Wal-Mart. I lined it with a combination of green fabric and white fabric I reclaimed from sheets bought at a thrift store. I used the green at the bottom of the skirt, so my legs might blend into it a bit more, hoping that it would help the illusion that I had no legs.

Since this character is only depicted as a sprite, not even having arms, I had a lot of freedom with how I would make it. I decided that a wrap dress would look a bit more "ethereal" or something. I wanted the jersey to drape a bit in the design, so I cut the jersey bigger than the lining. There is one instance in the comic where Jadesprite is shown in a more human form, and she has large puffed sleeves, and a furry chest, hence my decisions to make my sleeves so big.

I started by draping out the basic design in some fabric I got for $0.50 a BOLT. It was $0.10 a yard, so I didn't care that it was gaudy Hannah Montana fabric, haha
I came up with the design for the puff sleeves by drawing out a basic sleeve shape, cutting off the sleeve cap and cutting it in the middle, and separating it in quarters. I stretched out the sleeve cap more widthwise than I did lengthwise, if that makes sense. When I went to construct the sleeves, I just gathered the top and bottom of the sleeve cap before sewing it to the rest of the sleeve and the armscye.

To keep the sleeves puffy, I sewed in some tulle, which I had gathered up a bunch to puff out a lot, and covered the itchy ends of the tulle with ribbon. I sewed in a length of ribbon to help hold the sleeve cap to the correct length. I think I might add in a couple more ribbons in each sleeve to hold the puff up better.

The sash attaches with two pants hook and eyes, and a single snap to hold the bow in place on one side, and it is sewed down on the other side.

The ears are on a thin black metal headband. I cut some super heavyweight interfacing into the shape I wanted, and whipstitched it to each side of the headband. I then cut out the fur and hand-stitched it to the interfacing. I had to cut the fur to the length that I wanted it to be.

For the furry neck, I got some really long fur from a friend of mine, and colored the roots green with 3 different colors of Sharpies. It took a while, and my finger tips were all green from smudging it around as I went. I'm really happy with how it came out. After it was all colored, I trimmed the fur on the back of the neck, so it wouldn't rub on the wig quite so much and tangle it.  I then lined it with a white fabric, and added a tab of fabric and snaps to close it.

I made gloves similar to what I did for my weeping angel costume, by gluing on painted fingernails to make them a little more realistic. I just traced my hand carefully and sewed around that to make the gloves out of some leftover jersey.
I didn't want to deal with painting my hands for this costume, so the gloves were awesome to have.

All I did for the glasses was to paint them. I looked at other peoples' Jadesprite costumes, and I didn't like how the glasses were whatever color they ordered. I wanted mine to match and be green, like how they are in the comic.

For the makeup, I used the method I described in my post about our Adventure Time costumes' makeup. I just used white as a base, and green to contour. I painted the bottom of my nose green to emulate a dog's nose, and used green to color in eyeshadow and my eyebrows.

And that's pretty much how I went about Jadesprite. Nothing fancy, but a lot more planning went into it than I thought I would put into it.

As always, if there are any questions, shoot me an email or something! I'll try to answer as fast as I can!

Sophitia's Wig

I aplogize for the lack of photos. I'll take some of the completed wig, and add them a bit later :)

To create the wig, I used a 2 color blended blonde Dory wig from Amphigory, and I bought 1 pack of kinky hair, and 2 packs of each blonde color silky hair from Doctored Locks.

I couldn't find any tutorials on anything like I wanted to do here, so I kind of made it up.

I used some batting and fabric dyed to match and made three tapered tubes to make up the bulk of the braid.

I made weft of the kinky braid, and blended my silky braids to make wefts using this tutorial:

After I made the wefts, I cut them into 3 pieces, and attached them to each of the tubes.

I sewed the tubes into the back of the wig, a little but up from the bottom of the back of the wig.

AFter all that, I simply sprayed a lot of hairspray to help glue the hair the fabric tubes as I braided it.

I recently restyled the wig to include hair nets wrapped around each piece of the braid to help it stay neat and not get tangled. I learned that trick from working at Disney :) You can't see the nets unless you're looking for them and know the nets are there.

After braiding it, I  sewed it using clear thread and a curved needle to keep the braid together.

Simple :)

Sunday, June 3, 2012

Flame Princess wig progress/information

I've had a few people ask me about how I did my Flame Princess wig, and honestly, I made it up as I went.

I started with:
 a Cosplay Wigs USA Pumpkin 90cm long curly wig.  (it was a lot lighter than the photo)
Clear Elmer's School Glue
a curved sewing needle
thick strong thread
clear thread
foam brushes
lots of bobby pins (to hold it in place as you glue it)

The curls made it harder to work with, but if I made it again, I'd still use the curly one, just because I really loved the curls that came set into the wig. I used the same wig in green for my Jadesprite costume.

First off, the orange wasn't the color I wanted it, so I dyed it a bit darker orange.
I used this method (click for full resolution)


But instead of putting it in a tub to soak, I put my dye in a spray bottle and sprayed it in sections all over my wig. I actually WANTED it to not be 100% even in color. I thought the variances in shades of orange would make it look a little bit more realistic.
After it dried overnight, I loosely braided it before I washed out the extra dye, so it wouldn't get quite  as tangled. Its going to get VERY tangled through the whole dyeing and rinsing process.

Red and orange dyes never really wash out 100%, so I gave up after about half an hour of washing it in the tub, under COLD water.

After rinsing, I made a solution of lotion and water in a spray bottle and shook it up really well until it was a could water. This makes a good detangler, which will smell like whatever lotion you use.
I just sprayed it all over a tangle and started working it out gently, starting at the BOTTOM of the fibers.
It took longer to detangle it than it did to rinse it.
I let the wig sit overnight again to dry throughly, and I sectioned it out into a lot of equal sections before I started to style it.

I carved a block of green florist's foam into a rough cone-type shape, then covered it with a red-orange craft foam, which I forgot to take a photo of before I sewed it into my wig with thick button thread.

I sewed it to the vertical elastic in the wig, in the position I wanted it. I didn't remove any wefts underneath where I put the cone, since it wasn't super large.

After I made sure the cone was where I wanted it, I used the foam brushes to spread glue all over the cone and started to use small sections of hair from close to the cone to cover it. I spread out the hair evenly and made sure to really saturate it with glue, since this was the base coat of fiber and you wouldn't see it anyway.





I made up the wrapping pattern as I went, and I needed to add some more volume to the base of the cone, so I pulled out some small sections of hair and teased and back combed it until I had a nice fluffy tangled mess, which I rolled up and sewed into position with the clear thread.

it looks kind of nasty and really messy at this point, but you cover it all up int he end, and this was a lot easier to me than to try to make a pad out of foam or batting, since it was soft, and exactly the same color as the wig.



I didn't have much of a plan on how I was going to wrap it up, but I knew what I kind of wanted it to look like in the end.
I would take bobby pins and pin it in a way to see if I liked how it looked, and I would un-pin it, use the foam brush to burst a little bit of glue on the fiber in sections, starting nearer the roots, placing that where I wanted it, and pinned it where I wanted it before eI move on further down the section of fiber.

Almost finished:



I don't know what else to say about it, except that it took over 15 hours (nearly straight!) of styling, and about 2 and half days of just dyeing it and rinsing it out.

I just kept wrapping and pinning and unpinning and gluing and pinning it again.

Once I got to the outermost layer, I didn't coat the entire section of fiber with glue, I kind of put a line of glue where I knew it would be pinned and made sure the section I was glueing was really stuck down.

After I had the whole outer layer pinned and glued down, I let that dry for a while.
After it had all dried, I used the curved needle and the clear thread to sew into my wig to hold down all the little curls and to make sure the outermost layer didn't budge.

The wig is REALLY back -heavy, so I got a couple of toupee clips and sewed into the front, right about where the hairline is above my eyes.

And that's it.
I didn't use any hairspray on this, since I dyed it with alcohol, and hairspray is primarily alcohol, which would have ended up with the color being stripped out or running if I had used it as my primary adhesive.

Here's the finished product!




LinkWithin

Related Posts Plugin for WordPress, Blogger...